stabilizer

Répondre
miguel ramos
Formation Théorique
Formation Théorique
Messages : 22
Enregistré le : 19 déc. 2005 17:53

stabilizer

Message par miguel ramos »

in the translated plans from Littner , for the stabilizer draw , show the legend use 3/32 mahogany ply for the cover skin.

I would like to know what say in the original French plans , I soupouse should be 2mm okoume ,

Im using birch , and acording to aditional info I should change 2mm okoume for 1,6 birch if using birch

tanks
Avatar du membre
Jean-Claude Meunier
Pilote Privé
Pilote Privé
Messages : 110
Enregistré le : 01 mars 2005 13:49

Message par Jean-Claude Meunier »

I am a bit late to answer your question about 3/32 mahogany ply for the stabilator covering.

If it is similar to my Diamant stab, and I think it is, your can use 1.5 mm birch instead of the 2 mm mahogany but it will be a bit heavier! (and stronger).

Good luck!
Jean-Claude Meunier
Québec, Canada
C-GUMM
miguel ramos
Formation Théorique
Formation Théorique
Messages : 22
Enregistré le : 19 déc. 2005 17:53

mahogany

Message par miguel ramos »

tanks

:idea:
Répondre