tailplane spar

Répondre
miguel ramos
Formation Théorique
Formation Théorique
Messages : 22
Enregistré le : 19 déc. 2005 17:53

tailplane spar

Message par miguel ramos »

Hi Im building the tailplane ribs. and spar

-the plywood sheet for the webs in tailplane spar is one piece entirely each side ,or could be in 2 sections of plywood as the ply in the main spar for example ????

-the cap/semelle of the spar is in one piece ???

tanks :?:
prographics2002
Formation Théorique
Formation Théorique
Messages : 20
Enregistré le : 22 mai 2006 13:27

Re: tailplane spar

Message par prographics2002 »

miguel ramos a écrit :Hi Im building the tailplane ribs. and spar

-the plywood sheet for the webs in tailplane spar is one piece entirely each side ,or could be in 2 sections of plywood as the ply in the main spar for example ????

-the cap/semelle of the spar is in one piece ???

tanks :?:
I think the webing can be in two pieces as long as you make the correct scarf joint between the two pieces of plywood.

Miguel, are you just starting to build the Beryl? Where are you located?

Roger
miguel ramos
Formation Théorique
Formation Théorique
Messages : 22
Enregistré le : 19 déc. 2005 17:53

beryl

Message par miguel ramos »

:eyes:

yes , I have started building my beryl ,

now Im making the tailplane , as I m waiting for the tubes

Im in San Jose - Uruguay - Southamerica

I sent a email to you when you enter the forum , didn`t receive???

if you want to be in contact , sent a e mail to ,

sanjo@montevideo.com.uy

sanjo
Répondre