fin hinges

Une petite photo de votre avion ou de votre construction en cours ? :-)
Répondre
miguel ramos
Formation Théorique
Formation Théorique
Messages : 22
Enregistré le : 19 déc. 2005 17:53

fin hinges

Message par miguel ramos »

I have a question about the hinges in the estabilizator and vertical fin.
:?:

the translated plans talk about "stop nuts" for the screws in the
hinges installed in the estabilizator spar and fin spar.


I have heard about most common are using "nutplates or anchor nuts" for it

what are the correct ????

merci

sanjo@montevideo.com.uy
miguel
Avatar du membre
diamant78
Pilote Privé Train Classique
Pilote Privé Train Classique
Messages : 273
Enregistré le : 14 sept. 2004 21:03

Message par diamant78 »

Hello Miguel,

I m not completely sure to understand your question but, if you are talking about the nut that are inside the stabilizator or the vertical fin to screw the hinge (2 nuts per hinge), on French plan, nutplate with anchor nuts are mentionned (for CP 615)

Amicalement
Chris
miguel ramos
Formation Théorique
Formation Théorique
Messages : 22
Enregistré le : 19 déc. 2005 17:53

nutplates

Message par miguel ramos »

ok ,Chris

tanks for your reply .

yes you are correct about my question ,
as I understand from you , the use of nutplates (anchor nuts) is correct

miguel
Répondre