Le Forum Avions Piel, consacré aux Pierres Précieuses. Super Emeraude, Beryl, Saphir, CP80 etc .

prographics · Formation Théorique Inscrit le: 20 Mai 2006 Messages: 2

The plans are not clear on how to attach the hinge bearing to the rudder.
The plans call for "1-hinge bearing, 2-10-24x27mm bolts, 2-10-24 nylock nuts, & 4-wood screws" I am using the Aurora MM-5 bearing, does the bearing attach straight to the wood spar using a anchor nut or is there a metal plate held in place by the wood screws?

Roger

cp1315 · Administrateur Inscrit le: 07 Sep 2004 Messages: 1879

Hi Roger

Daniel has sent pictures about his modification in fuselage structure in rear seat, named "tube de torsion", he did'nt see this in your project and would like that you see it.

Thanks to him.

prographics · Formation Théorique Inscrit le: 20 Mai 2006 Messages: 2

Thanks for the pictures. I was thinking about putting the master cylinders
on the rear brake pedals and that helped me make up my mind. Sorry for the late response I was in China for a couple of weeks for work.

The seat mount and modified tubing at the rear stick are not a change in the plans but only how he did his, correct?

Roger